Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
Hi GUys,
Decided im putting full cage on my disco 1 now so my roof bars are no longer required,
This was home made and has been used to carry all sorts and has stood the test of time, it fits into the gutter and has 4 fastenings underneath each side,
the lower frame work was made from galv cds, the top part i had from an old motor and just adapted it to fit this.
I made it so that the long side bars sit off the car and these have saved roof and windows numerous times off roading, as can be seen its scratched to buggery.
Theres mounts on the back for some lights that arnt included, threaded bar on front for high lift jack, 4 holes for spots, it does have a cb mount up back, but it didnt earth well enough to be used.
from the top
from the back - the thinner bar towards back has been bent downwards slightly, and you can just see one of the mounts for lights
from back
front from side - fits snugly behind southdown snokle
from side, you can see 3 tie down hooks, these are same at other side
mounts, theres four mounts at each side, the back drivers needs altering as it wpouldnt go on car, easy enough to do iv just not been bothered and its not bothered me or effected it
from front
side 2
as you can see its been used to slide along trees lol
looking for offers around £130, i can respaint if required aswell
Decided im putting full cage on my disco 1 now so my roof bars are no longer required,
This was home made and has been used to carry all sorts and has stood the test of time, it fits into the gutter and has 4 fastenings underneath each side,
the lower frame work was made from galv cds, the top part i had from an old motor and just adapted it to fit this.
I made it so that the long side bars sit off the car and these have saved roof and windows numerous times off roading, as can be seen its scratched to buggery.
Theres mounts on the back for some lights that arnt included, threaded bar on front for high lift jack, 4 holes for spots, it does have a cb mount up back, but it didnt earth well enough to be used.
from the top
from the back - the thinner bar towards back has been bent downwards slightly, and you can just see one of the mounts for lights
from back
front from side - fits snugly behind southdown snokle
from side, you can see 3 tie down hooks, these are same at other side
mounts, theres four mounts at each side, the back drivers needs altering as it wpouldnt go on car, easy enough to do iv just not been bothered and its not bothered me or effected it
from front
side 2
as you can see its been used to slide along trees lol
looking for offers around £130, i can respaint if required aswell
