furrywoolyhatuk
New Member
- Posts
- 6
Hi guys
Firstly I have searched and searched! This thread was useful http://www.landyzone.co.uk/lz/f68/disco-door-springs-how-171201.html
But my back door won't lock, either with a key, central locking or from the button inside. Iv squirted everything in wd40 and I have tested the actuator and that was fine.
Before I embark on dismantling the mechanism I wanted to check iv not missed something obvious. If you have a look at the attached picture you can see a black plastic tab (blue arrow pointing to it) that look likes it should be attached to something:
Any suggestions?
Firstly I have searched and searched! This thread was useful http://www.landyzone.co.uk/lz/f68/disco-door-springs-how-171201.html
But my back door won't lock, either with a key, central locking or from the button inside. Iv squirted everything in wd40 and I have tested the actuator and that was fine.
Before I embark on dismantling the mechanism I wanted to check iv not missed something obvious. If you have a look at the attached picture you can see a black plastic tab (blue arrow pointing to it) that look likes it should be attached to something:
Any suggestions?
Last edited:
