Series 2 Different sized nuts...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Marmaduke

Marmaduke

Well-Known Member
Posts
9,773
Location
Near the land of 'Me Duck'
No my name isn't Adolf, my project 2a has got different sized wheel nuts on the front and rear axles (as in different thread diameter)
Can this be rectified by altering anything in the hubs or am I better off sourcing a different axle so they match?

Ta muchly :D
 
So one of your axles has the older size [ pre 65 I think ] wheel studs/nuts.The simplest fix would be to just change the hub's for the later type.
Just as well your name is not Goebbles or you would have no nuts at all.:D
 
tottot said:
So one of your axles has the older size [ pre 65 I think ] wheel studs/nuts.The simplest fix would be to just change the hub's for the later type.
Just as well your name is not Goebbles or you would have no nuts at all.:D
Click to expand...
Brill thanks for that, I'll look into it further when I get around to rebuilding them. Just something else on the list at the mo
 
You must log in or register to reply here.

Similar threads

B
rear axle
Replies
1
Views
548
jai_landrover
jai_landrover
proto57
Freelander 2 (LR2) Baffling (to me!) front Half-shaft/Axle Length Mystery! Too short, twice???
Replies
10
Views
1K
Zorro587
Zorro587
N
Rear diff issues
Replies
11
Views
1K
Jimmy1981
J
R
Brakes
Replies
9
Views
1K
rubix101
R
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
545
xDParis64
xDParis64
Back
Top