Defender window

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
danchapman2k2

danchapman2k2

Well-Known Member
Posts
1,097
Location
Writtle, Essex
Right im really struggling here.

I have been searching around but cant find what they are called. I am looking for a parts sheet of the front door windows.

Basicly i need the side runner that if you look at the window from the inside - it runs between 2 peices to the top and stops it falling out. Basicly i cant wind mine down fully one side as it fulls out the runner. Also looking for the seals that go on the doors for the window so when there up nothing gets down there.

If someone could help would be ace its frustrating not having my haynes manual delivered yet!
 
I had the same problem with my drivers window. I tried the age old remedy of taking it all apart and putting it back together again and it works nicely. Check that the lining of the runners (the strange felt like stuff) is still in the runner at the bottom and not hanging out, this is what was causing mine to jump out. I stuck it back in with black nasty, bent the runner back into shape and it all works fine.
 
You must log in or register to reply here.

Similar threads

torr_td4
1996 Defender 90 wiring diagram
Replies
1
Views
399
Anaconda
A
mjr92
Rear sliding side windows
Replies
1
Views
288
julianf
julianf
L
Disco 3 (LR3) I return to the fold with a Window Fault
Replies
6
Views
575
johnlad
johnlad
Cornishdefender
Buffeting wind noise with 1 window open
Replies
12
Views
1K
Alibro
Alibro
Sulcalibur
Driver window won’t go up
Replies
4
Views
641
xDParis64
xDParis64
Back
Top