Defender 90 rear winch and tow bar
- Thread starter davenrea
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
zzr1200
Well-Known Member
- Posts
- 1,862
- Location
- Chesterfield, Derbyshire
Fit an adjustable height tow bracket and buy a second slide/mounting plate
Run 2 x 50mm welding cables (+ n - battery) to a suitable plug mounted at the rear, make up a mounting plate for the winch to bolt to the spare slider, fit and plug in winch when required...........simples...
Run 2 x 50mm welding cables (+ n - battery) to a suitable plug mounted at the rear, make up a mounting plate for the winch to bolt to the spare slider, fit and plug in winch when required...........simples...
Last edited:
ZZR1200, bike and landy I presume - good init! just bought a VN900 last summer cuz the law didn't like me on the nija!!
I already have a dixon-bates on the back and was thinking just that by using a warn mount like here with a receiver but the mount works out a shed loads of dosh for a bit of metal. My thoughts were to get a bracket fabricated so it went onto the dixon-bates ladder but wasn't sure about strength etc
I already have a dixon-bates on the back and was thinking just that by using a warn mount like here with a receiver but the mount works out a shed loads of dosh for a bit of metal. My thoughts were to get a bracket fabricated so it went onto the dixon-bates ladder but wasn't sure about strength etc
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
ive just bought a rear winch bumper and winch,but i have removed the adjustable towbar as i dont need it any more..
http://www.douglassmotors.co.uk/4x4/another_section.html
http://www.douglassmotors.co.uk/4x4/another_section.html
zzr1200
Well-Known Member
- Posts
- 1,862
- Location
- Chesterfield, Derbyshire
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
warn
