Hi guys and gals. hopefully someone can help and let me know what’s going on with my fog lights. So I press my switch down and fog lights come on. Great. Push it up and they stay on. Don’t go off until I push it down again. Only 2 wires on the back of switch so not really sure how it’s suppose to work. I’m guessing there is a relay involved but electrics isn’t my strong point. Or is it suppose to be a spring loaded switch. I’m really confused and have an mot on tuesday so want to sort it if possible. thanks.
Defender 90 fog switch WTF
- Thread starter Pablo63
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
wot def you got? year /model?
- Posts
- 4,477
Yes, thats how it works as it fires a relay which turns the light on.
It should only work when your lights are on and it lights up an indicator (orange square) on the dash.
It should only work when your lights are on and it lights up an indicator (orange square) on the dash.
I was about to post this same issue. I have an early type TD5 so from roughly the same era. At this time were they in the process of changing to a new type of switch or something? How is this considered okay? It’s bizarre. Do earlier 300TDIs have a different switch, or maybe later TD5s?
tottot
Well-Known Member
- Posts
- 7,994
- Location
- west wales coast
It has an over center spring, recon it wears/gets sloppy over time. Mine is pretty loose, Must be vibration that does it as rare for me to use it here.[ MOT time] That said If I were to go somewhere today should have it on as third day of thick fog!
- Posts
- 4,477
Ummm, yes. Like I said last July (post #17), that's how they work.
How much did you pay for the new switch/ignoring me ?
FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
The early switches latch on, and directly switch the lamp relay. Presumably to prevent people leaving the rear fog on accidentally, it was replaced with a momentary switch which then triggers a small ECU to operate the lamp. Push it once to switch the lamp on, push it again to switch it off. When you turn the ignition off and on, it resets to the default off state, and you have to actively turn it on again if you want it.
Someone has fitted the early type switch.
Someone has fitted the early type switch.
As long as you are aware of it and that is how it works there is no actual harm in having the older switch. In mine I have the later style wiring for the momentary switch but I have the old style column mounted fog light switch fitted (similar to the headlight switch).
