Defender 200tdi wiring

leeby7 · Feb 9, 2016

Is there anyone in Bradford that could help or advice me with my wiring on my defender 110 that i'm rebuilding? Having problems getting all the lights working on it, Cheers lee

mick the builder · Feb 9, 2016

Plenty of help on here if you fancy doing it yourself. 99% of the time the problem is bad earths and corroded bullet joints.

leeby7 · Feb 9, 2016

Its none of the above as its been strpped to the chassis and the only thing left in it was the bulkhead and engine and box. Thought it was bad earths but think i eliminated that.

mick the builder · Feb 9, 2016

As you have a clear run at everything, try a lenght of wire direct from batt neg. to the fittings and or direct from batt pos to fittings then at various points back along the loom till the lights dont work. Or use multi meter if you have one.

zeaphod · Feb 10, 2016

Give us a bit more detail of what's working and what's not. There's not much to the wiring on a 200tdi.

Defender 200tdi wiring

leeby7

Active Member

mick the builder

Well-Known Member

leeby7

Active Member

mick the builder

Well-Known Member

zeaphod

Well-Known Member

Similar threads