Defender 110 Screenwash bottle access
- Thread starter PeterWard
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Woody3
Active Member
- Posts
- 333
- Location
- Nottinghamshire
Are you sure that the water isn't iced up?
The pump won't work if so...I'd also check the fuse (if separate) before you start taking everything apart
The pump won't work if so...I'd also check the fuse (if separate) before you start taking everything apart
ratty
I'm not special I'm limited edition
- Posts
- 34,277
I can get to the pumps from within the engine bay on my TD5.
Hi, Thanks for the replies
I know the fuse and the pipes are OK. The rear screen wash works but not the front. I beleive there are 2 pumps from the same bottle one for the front and one for the back. Ill check the route of the pipes for joints being blocked etc before taking the light out.
I know the fuse and the pipes are OK. The rear screen wash works but not the front. I beleive there are 2 pumps from the same bottle one for the front and one for the back. Ill check the route of the pipes for joints being blocked etc before taking the light out.
Hi fixed the problem. Washbottle pump behind the headlight. swapped rear and front pipes over and rear worked but not front so suspected blocked pipe. Found that a non return valve is situated in the engine compartment under the wing in front of the passenger area. Put a new one in fine. Took Non return valve apart and the diaphragm was faulty. Now all works fine.
