PopPops
Well-Known Member
- Posts
- 474
- Location
- Fareham, Hampshire
Hi,
Today I was tracking the cause of an oil leak (probably rocker cover gasket) and gave the area thorough dousing with brake cleaner to get rid of all the oily mess so I could see the leak. Most oil was at the rear FPR side of the engine which got most brake cleaner, and all over the bell housing that side.
I then took it for a short drive to provoke the leak. Sometime into the drive the MIL light came on (it was off driving out the drive) but with no other symptoms, no hesitation, no misfires, just running like it always does.
At home put the Nanocom on it and it came up with a "crank speed high" error, or something like that, I forgot to photo it. Cleared the fault. Started again, no MIL, no fault. Been on a 30 minute drive and all OK. No idle speed error, no cylinder imbalance, all fine.
I don't believe in coincidences or faults which fix themselves, I've checked the CPS connector is on correctly. As far as I know the CPS is original, I've had the Disco for 6 years and I haven't changed it.
Any suggestions as to what provokes this error?
Thanks!
Today I was tracking the cause of an oil leak (probably rocker cover gasket) and gave the area thorough dousing with brake cleaner to get rid of all the oily mess so I could see the leak. Most oil was at the rear FPR side of the engine which got most brake cleaner, and all over the bell housing that side.
I then took it for a short drive to provoke the leak. Sometime into the drive the MIL light came on (it was off driving out the drive) but with no other symptoms, no hesitation, no misfires, just running like it always does.
At home put the Nanocom on it and it came up with a "crank speed high" error, or something like that, I forgot to photo it. Cleared the fault. Started again, no MIL, no fault. Been on a 30 minute drive and all OK. No idle speed error, no cylinder imbalance, all fine.
I don't believe in coincidences or faults which fix themselves, I've checked the CPS connector is on correctly. As far as I know the CPS is original, I've had the Disco for 6 years and I haven't changed it.
Any suggestions as to what provokes this error?
Thanks!
