clutch problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

slimworx

New Member
Posts
50
hi all i am so p155ed off to tryed to fit a clutch slave today but the clip on the arm was broken so i took the engine out sorted it out fitted the new slave with engine out and the slave feels very stiff but i fitted anyway went on test drive once i put engine back in got to the top of the street at the clutch pedal was stuck solid
now the cluch pedal is stuck solid does anyone think it could be a faulty slave thats sticking

before i fitted the slave i tryed pushing the cylinder in and it was really stiff could theis be the problem
cheers
 
Last edited:
You can have problems where the rod goes through the swivel/pivot thing. If the threadlock nut on the end of the rod is over-tightened it can stop the pedal from going down or back up.
 
You must log in or register to reply here.

Similar threads

J
Clutch failure
Replies
5
Views
396
dag019
dag019
C
300TDI, clutch slave cyl, pushrod. dimensions
Replies
14
Views
568
dag019
dag019
MULDERKE
Freelander 1 Sad Tidings. And many Thanks.
Replies
6
Views
750
WhiskyLassie
WhiskyLassie
C
Clutch slave cylinder leak
Replies
4
Views
951
Mark Piercy
Mark Piercy
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
6
Views
567
Geckomike
G
Back
Top