clunking

T

taffin37

New Member

Posts

1

• Nov 12, 2009

• #1

I have a freelander td2 o3 and it clunks when I change gears if I do it slolwly though it doesn't any ideas I'm new to 4x4ing

 

A

AAA

New Member

Posts

10

• Nov 13, 2009

• #2

Hi worn bush/mount on rear diff, about £20 and half hour diy. usually the one at the front, get under it and push the prop shaft up and down you will see the play in the worn bush. hope this helps..

 

R

repofrance

New Member

Posts

17

• Nov 13, 2009

• #3

i can confirm this is usually the problem and would advise you change it as sson as possible.
mine failed competly while taking the kids sight seeing in london. we broke it out side buckingham palace. the vibrating prop damaged the exhaust and we had an armed gaurd including the helicopter watching use while i removed the whole shaft during changing of the guard

 

ming

SPACE TWOT

Posts

11,977

Location

PLANIT ZOG

• Nov 13, 2009

• #4

the centre one goes first [thats the hardest to replace] lh and rh is an easy D I Y