clonking noise

need some advise please ive just striped my front axle down and re built to stop oil leaks and stop this clonking noise when i turn ,but guess what its still there i used all new parts any ideas its a series 3 swb [1982]could it be the bushes on spring as its only when in full lock i also changed track rod ends thanks dave h

check bushes by stickin a big bar in the gap between spring and chassis. give it a good hard pull . you should be able to see any movement if them is ferked

Hi the problem is on your series is that you havent adjusted the wheel locks when you rebuilt the axles. when you are on full lock the ujs in the axle are are trying to lock. the bolts on the swivel should been half inch out min the bolt is on the seal on the brake drums side and the stop plate is on the swivel side where you fasten the swivel to the axle.