Disco 2 Chirping sound during idling

berg450

Well-Known Member

Posts

668

Location

Hungary

• Feb 11, 2025

• #1

Hi All, just recognized today after about 1 hour drive chirping sound during idle (and also probably under load but hard to check alone). Nothing removed yet, so not possible to locate where it comes from. Tried to upload video, but could not.
Does not seem to be belt, but I do not know. As soon as I will have some time I will remove all covers and try to find the place. Any usual place I should check first?
Thanks

 

A

Anaconda

Well-Known Member

Posts

4,200

Location

Thames Valley

• Feb 11, 2025

• #2

Remove the belt, check all bearing, tensioner. You can run it for a short period of time to see if the noise is gone, with the belt off.

 

berg450

Well-Known Member

Posts

668

Location

Hungary

• Feb 11, 2025

• #3

Anaconda said:

Remove the belt, check all bearing, tensioner. You can run it for a short period of time to see if the noise is gone, with the belt off.

Click to expand...

The tensioner has gone. It still spins but with sick noise, bearing gone. Thanks

 

A

Anaconda

Well-Known Member

Posts

4,200

Location

Thames Valley

• Feb 11, 2025

• #4

The advice seems to be fit genuine Land Rover (in a Land Rover box), that's what I did. I have read of aftermarket failing out of the box.

 

berg450

Well-Known Member

Posts

668

Location

Hungary

• Wednesday at 18:00

• #5

Anaconda said:

The advice seems to be fit genuine Land Rover (in a Land Rover box), that's what I did. I have read of aftermarket failing out of the box.

Click to expand...

Just received the genuine new tensioner, wanted to change tonight but seems that I will need special 15mm socket? I have tried my standard hex head 15mm socket but seems that I need more narrow and 12 point head?
edit. probably found the answer. 14mm narrow wall 12 point

 

Last edited: Wednesday at 18:20