Chequer plate 90 fitting.

ReeceKnight · Mar 10, 2017

so the top of the wings have got holes for rivers etc but the lower sills under the door and section behind the rear arch have no holes drilled? is this somthing that can be tiger sealed and clamped up or another form of bonding? my lower seals are bent and not in good shap. or am I meant to drill them ?

Any help would be appreciate as I want to fit them in the next hour or so.

Cheers chaps

zeaphod · Mar 10, 2017

Normally I would drill and rivet them on.

meego · Mar 10, 2017

Mine were pre drilled for counter sunk stainless fixings. Having said that, I don't think they would go far if stuck on with Tiger Seal. That stuff is the dogs

neilly · Mar 10, 2017

Fix them mechanically with rivets, or even rivnuts and countersunk bolts if removal is needed.

Just in case one does not stick well. I personally would not want to be behind you at 60mph if one ever does let go..............

Cheers

Paul D · Mar 10, 2017

Tiger seal first, let it go off so they're stuck, then drill and pop rivet ..

Chequer plate 90 fitting.

ReeceKnight

Member

zeaphod

Well-Known Member

meego

Well-Known Member

neilly

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Similar threads