archwayanimal
Active Member
- Posts
- 191
- Location
- Oxfordshire
Disco 2 Can someone tell me what this is for?
- Thread starter archwayanimal
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
archwayanimal
Active Member
- Posts
- 191
- Location
- Oxfordshire
Looks like a small pipe
- Posts
- 45,261
- Location
- East Dorset
It would have been attached to the EGR which has been deleted, or not! If deleted, this should be plugged. It is a vacuum pipe.
I am assuming it is on the driver's side of the engine bay.
I am assuming it is on the driver's side of the engine bay.
archwayanimal
Active Member
- Posts
- 191
- Location
- Oxfordshire
It is on the driver’s side and the EGR has been deleted, several years ago. Assume it has been plugged as haven’t had any issues! Many thanks!
- Posts
- 45,261
- Location
- East Dorset
If it isn't plugged I would plug it as that is how it is supposed to be left. I don't know what issues leaving it unplugged could cause, but @sierrafery will know, I expect.
archwayanimal
Active Member
- Posts
- 191
- Location
- Oxfordshire
- Posts
- 45,261
- Location
- East Dorset
You didn't mention which sort of Disco 2 you have, if it is after about 2002 then it'll be either a 15p engine or a 16p, in which case yes there will be two pipes, and I think I am right in saying you need to block both off. The 10p engines (pre facelift) only had one, i.e. like mine.
archwayanimal
Active Member
- Posts
- 191
- Location
- Oxfordshire
Sorry - it is a 2003 so a 15p. I’ve blocked that pipe off now. Thank you for your help and Happy New Year!
- Posts
- 45,261
- Location
- East Dorset
My pleasure! Glad to be of help!
Happy New Year to you too!
(Wish all Landy problems were as easy to solve!)
