britpart winch wiring needed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I have not seen the britpart winches but all electric winches function in the same crude way.

There are 2 posts for in/out, 1 for power supply and 1 earth.

finding the power and earth leads/points should be straight froward, replicate the power on the albright (you should get a diagram with the solonoid when bought). leave the earth where it is and then just conect the other 2 posts. test it, if it winds in when it should be going out, reverse the leads. simples.

Im not sure what you want to do with the wonder lead, but I cut my socket off the solonoid pack and put it in the blank wing plate (solonoid under wing in engine bay), you then just crimp 3 spade connectors onto the thin wires and push them onto the solonoid. At this point I also ran 3 new wires into the cab for an "incab" switch... worth it.

images below of wiring diagrams for albrights. top one is 2 contact, bottom is 3 contact (warn etc). not sure what uses 2, maybe your britpart? only way is to have a look!

http://www.llama4x4.com/USERIMAGES/Contactor2wire.pdf

http://www.llama4x4.com/USERIMAGES/Contactor3wire.pdf
 
Last edited:
whats all the fuss with britpart mind paddoks do like to unload it off on you . i ordered a borqbeck clutch kit but got sent a britpart item its been fine up until now touch wood
 
hi.

Cheers for that will order my solenoid from e bay tomorrow.

Would not recommend a britpart winch to any one. Apart from the solenoid issue it filled the winch motor with water and seemed itself solid. It was only 8 months old and used 3 times. Britpart accused me of using it underwater even thought it had not. They were not interested
 
thats cause their *unts.

boycot *hitpart and buy better quality stuff. Keep your eye on ebay for a used warn/superwinch/goodwinch. Just get the main body, use youe solonoid pack and wire and sell the working *hitpart back on ebay.

G

waste of time/money :(
 
been reading the landrover magazine and they have big advertisement for britpart, and they seem to have products all over the magazine and garages for that matter etc. why is this so, if they are so cr*p
 
bobbydog said:
whats all the fuss with britpart mind paddoks do like to unload it off on you . i ordered a borqbeck clutch kit but got sent a britpart item its been fine up until now touch wood
Click to expand...

If you ordered borg and beck, and got britpart why the heck did you fit it being such a big job???????
 
RUDDdefender90 said:
been reading the landrover magazine and they have big advertisement for britpart, and they seem to have products all over the magazine and garages for that matter etc. why is this so, if they are so cr*p
Click to expand...


Hi Rudd, there are many member on her inculeding myself (i have delt in parts until recently) that have suffered to the quiality of britpart.
 
You must log in or register to reply here.

Similar threads

A
Disco 3 rear suspension wiring
Replies
0
Views
150
Andymay
A
dag019
Fitting a Husky Winch
Replies
8
Views
559
dag019
dag019
ibizalandy
Best alternator for 110 2.5D n/a
Replies
4
Views
318
lynall
L
J
Kenlow wiring mess
2
Replies
22
Views
1K
dag019
dag019
S
Reverse switch wiring
Replies
2
Views
481
Shore968
S
Back
Top