britpart ,a post repaire section and foot

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

major truma 2

New Member
Posts
525
Location
rotherham
im thinking of ordering a pair of a posts and feet ,and foot wells ,,has anyone used the britpart ones before if so are they ok ?
allso ,,has anyone used pegasus parts befor for series bulk head items .,again were they ok ?
cheers karl
 
trax said:
britpart can do thin crappy metal.. not heard of pegasus, had a look at yrm?
Click to expand...

ive looked at yrm ,,they dont do a lot tbh ,,pegasus do a lot more and seem ok on price ,,looked a britpart ones because they are half the price of yrm ,as im getting bulkhead galved i moght get away with britpart ones ,,its just the fit i was worried about really
 
My footwells I gotfrom Paddocks, dont know the make but price was good and good quality as far as I can tell, only thing is they lack the pressed bits of the original footwell so they're just a flat bit of metal
 
If your waiting for pay day and mot is comming, I guess Britpart anything is acceptable, but remenber you'll have to re-do them in an almost alarmingly short time !
 
I used bulkhead feet from Britpart and footwell from Pegasus.The feet were a good fit and made from the same thickness of metal as the remains of what I took off.Used Pegasus for footwells as they had the original pressed in ribs that the Bpart ones didn't have.Finding all the spot welds that held the feet in was a pain!
 
You must log in or register to reply here.

Similar threads

J
Smoking and low power.
Replies
13
Views
787
JCP123
J
J
2.0MPi losing power head scratcher
Replies
17
Views
3K
marjon
marjon
lightning
Drove a Series 3 today
2
Replies
31
Views
2K
lightning
lightning
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
569
xDParis64
xDParis64
P
Advice needed for fixing a VM 2.5
Replies
9
Views
2K
lynall
L
Back
Top