rangexispê
New Member
- Posts
- 10
Hi all!
I have a new problem with my RR DSE...
When i switch on the ignition, normaly the abs pump starts working imediatly. as soon as the pressure builds up, it stops and the lights go off. until here no problem! This thing is, my RR is now having a little delay when i switch the ignition on... the pump does not start working imediatly... it takes about 6 or 7 seconds to start working... and this is trigering a ABS fault!!!
If i turn it off, and then on, everything is ok... until i touch the brake pedal... and again, there is a delay and the abs fault is trigered...
i thought that my ABS relay was dead, so i change it. but the problem pressists. Now, I am thinking maybe it is pressure switch... but not intirely convinced... If i manualy connect the relay there is no problem, so something is not doing it´s job... ECU? Pressure switch?
HELP!!!!!!!!!!
I have a new problem with my RR DSE...
When i switch on the ignition, normaly the abs pump starts working imediatly. as soon as the pressure builds up, it stops and the lights go off. until here no problem! This thing is, my RR is now having a little delay when i switch the ignition on... the pump does not start working imediatly... it takes about 6 or 7 seconds to start working... and this is trigering a ABS fault!!!
If i turn it off, and then on, everything is ok... until i touch the brake pedal... and again, there is a delay and the abs fault is trigered...
i thought that my ABS relay was dead, so i change it. but the problem pressists. Now, I am thinking maybe it is pressure switch... but not intirely convinced... If i manualy connect the relay there is no problem, so something is not doing it´s job... ECU? Pressure switch?
HELP!!!!!!!!!!
