Brake lights not working
- Thread starter richbatch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Land Raver
Well-Known Member
- Posts
- 2,015
- Location
- In the dog house
Have you had the rear light wiring panels off? I'd check the earth is OK first. Whilst fitting new rear lights at the weekend I found a birds nest of melted wires and ended up replacing it all. The wires had chaffed where the loom enters the rear tub due to a missing grommet. I was amazed that they ever worked! It might be a simple fix
I'll save you some pain, my experience of series rear light problems boils down to the loom plugged into bulkhead under bonnet to chassis leg.
What happens is the loom rubs through where it enters, internally,where it exits, and in vicinity of rear lights on seam.
Check the fuse's and if you have continued problems disconnect loom,fit secure strong cord and pull it through and repair.
What happens is the loom rubs through where it enters, internally,where it exits, and in vicinity of rear lights on seam.
Check the fuse's and if you have continued problems disconnect loom,fit secure strong cord and pull it through and repair.
Vagrent
Yaaaar
- Posts
- 18,109
- Location
- Poiret West Sussex, Chichester.
I suggest not braking, no need for brake lights, problem solved
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Hand signals
