Brake carrier price
- Thread starter mickym
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Arctic2
Well-Known Member
- Posts
- 2,699
- Location
- Westmidlands
Where have you been searching ?
Freelander 1 TD4, 1.8 & 2.5V6 Front Brake Caliper Carrier Left - SEE100330 | JGS4x4
Freelander 1 L314 Braking Parts & Components | JGS4x4
most of the time the carrier is serviceable clean up ok and purchase pin kits ?
Freelander 1 TD4, 1.8 & 2.5V6 Front Brake Caliper Carrier Left - SEE100330 | JGS4x4
Freelander 1 L314 Braking Parts & Components | JGS4x4
most of the time the carrier is serviceable clean up ok and purchase pin kits ?
GrumpyGel
Well-Known Member
- Posts
- 26,304
- Location
- Christchurch, New Zealand
Possibly won't fit a '99 - different non-vented brakes.
GrumpyGel
Well-Known Member
- Posts
- 26,304
- Location
- Christchurch, New Zealand
Having said that, might be cheaper to buy all new MY01 parts if they will bolt onto the hubs and wheels fit over them (the '99 5 spoke 15" wheels won't for sure).
GrumpyGel
Well-Known Member
- Posts
- 26,304
- Location
- Christchurch, New Zealand
I presume because LR are running low on stocks, they have knocked the price up to wring every last penny out of their parts bin.
And presumably there are no aftermarket parts available. These were only used for 3 years, so there may not be a big enough market for people to make parts for.
I would do the sums and consider upgrading to the later brakes. If its about the same price, you will have better supplies going forward and better brakes to.
As I say, you will probably need to replace the wheels also to clear the bigger brakes.
