1) turbo to manifold (no pic, but googled a few times and cannot see a reference to what thread / size so I can order one. The three I have seem to hold boost ok, but...
2) clutch housing, see pic
3) in front of sump, see pic
Bolts Missing (various)
- Thread starter cborrman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1) turbo to manifold (no pic, but googled a few times and cannot see a reference to what thread / size so I can order one. The three I have seem to hold boost ok, but...
2) clutch housing, see pic
3) in front of sump, see pic
Hicap phill
Well-Known Member
- Posts
- 16,222
- Location
- Wiltshire
Front sump & gearbox are for wading plugs.
There not “missing”
There not “missing”
great thanks
Front sump & gearbox are for wading plugs.
There not “missing”
tottot
Well-Known Member
- Posts
- 8,013
- Location
- west wales coast
If you are regular in deep water wading plugs need to be fitted but also need to be removed quite often to allow any oil that may have collected to be drained.
what about occasional wading? do you need plugs?
glad I asked now.
Anybody know re the size and thread of the 4 turbo to manifold screws btw?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
manifold to head ?turbo is part of the manifold
true, apologies for confusion, this pic is not my engine or standard turbo but bolts I am talking about easy to see and have added a red circle
Attachments
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
that is not a std 300 turbo more like a vnt upgrade, if the nuts are 13mm the studs m8 x1.25
pete1987RRC
Well-Known Member
- Posts
- 5,136
- Location
- East Midlands
Was it in arkwrights shop
Similar threads
