Bloody Bleeding Brakes....

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

SteelMark

Member
Posts
44
Location
West of Ireland
Hi Everyone. I think I know the answer to this already but before a spend £100 plus on the answer I thought I would run it past a few of you. Car is a Defender 110 TD5 non ABS. I replaced a front brake caliper, 2 front metal brake pipes around the engine bay and the brake master cylinder and now cannot bleed the brakes. Using the 2 man method with a glass jar and hose I can see the fluid isnt really moving at all. I trimmed the old pipes and refitted them from the master cylinder back around and into the reservoir... guess what the fluid doesnt move and the reservoir just "gurgles". Do I need a new Servo? And why would it fail when it was working 2 weeks ago?I did all the work because it failed MOT for rusty brake pipes. The master cylinder was questionable as a mechanic rebuilt it last year and said I should fit a new one when I got a chance.
 
jamesmartin said:
you need to bleed the master, undo the steel pipes and get someone to press the pedal whilst you use your finger as a oneway valve over the port,that or masters buggered
Click to expand...
Thanks James. I thought by using 6" of the old pipes back around and into the top of the reservoir I was bleeding the cylinder? didnt want fliud spraying everywhere.... Or is there a knack to the finger method ie pressure on the upstroke?
 
SteelMark said:
Thanks James. I thought by using 6" of the old pipes back around and into the top of the reservoir I was bleeding the cylinder? didnt want fliud spraying everywhere.... Or is there a knack to the finger method ie pressure on the upstroke?
Click to expand...
yes to stop air been sucked back in
 
Sorted, thanks all. Sheer persistence in the end as it took about 2 hrs in the rain. One interesting observation. The wife suggested running the engine to increase pressure (I think she really just needed the heater on whilst pumping) and things seemed to go a lot quicker from there. I tried to explain that the servo increased pressure not flow ...... perhaps the heated cabin meant she pumped faster!
 
SteelMark said:
Sorted, thanks all. Sheer persistence in the end as it took about 2 hrs in the rain. One interesting observation. The wife suggested running the engine to increase pressure (I think she really just needed the heater on whilst pumping) and things seemed to go a lot quicker from there. I tried to explain that the servo increased pressure not flow ...... perhaps the heated cabin meant she pumped faster!
Click to expand...
:);)
 
SteelMark said:
Sorted, thanks all. Sheer persistence in the end as it took about 2 hrs in the rain. One interesting observation. The wife suggested running the engine to increase pressure (I think she really just needed the heater on whilst pumping) and things seemed to go a lot quicker from there. I tried to explain that the servo increased pressure not flow ...... perhaps the heated cabin meant she pumped faster!
Click to expand...

Have to be really careful what you write on LZ, bunch of pervs the lot of them!
 
You must log in or register to reply here.

Similar threads

W
Brakes require pumping!
Replies
9
Views
666
Anaconda
A
H
1985 90 brakes sticking on when engine warm
Replies
5
Views
490
tottot
tottot
R
Advice on brake master cylinder and rear brake valve
Replies
11
Views
1K
Rogerreed
R
Lej
Discovery 2 Clutch failure
Replies
2
Views
609
Lej
Lej
yfo866
Has anyone got any tips for bleeding 101 brakes?
Replies
12
Views
2K
yfo866
yfo866
Back
Top