Binnacle switch.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Big Phil

Active Member
Posts
176
Location
Sheffield
Easy question here fellow Disco'ites. How do you remove the binnacle switch/switches, I'm thinking of fitting cruise control on my 2000 td5. Going to have a look to spy if the cruise wiring is there.

Thanks.

Regards

Phil*
 
if i'm correct in thinking, then the cruise control wire you seek will be sat behind the airbag.
 
Thinking about it you will also prob have to get someone with a reader to tell the cars ecu it's now got cruise control
 
Thinking about it you will also prob have to get someone with a reader to tell the cars ecu it's now got cruise control

Hi,
No you won't - I fitted cc to mine a few weeks ago and it's "plug & play"
Hardest part was cutting the hole in the steering wheel for the switch. If you buy the kit it comes with a template.
Griff
 
Hi,
No you won't - I fitted cc to mine a few weeks ago and it's "plug & play"
Hardest part was cutting the hole in the steering wheel for the switch. If you buy the kit it comes with a template.
Griff


Out of interest, what kit did you buy?

Thanks,
 
Same as above link. R&C 4x4. The face lift kit is both black switches. Your's will be diferent I believe but site lists both. This kit contains screws/bracket and template to cut hole.
HTH,
Griff
 
Last edited:
Same as above link. R&C 4x4. The face lift kit is both black switches. Your's will be diferent I believe but site lists both. This kit contains screws/bracket and template to cut hole.
HTH,
Griff

i already have the binnacle button, is there a similar kit with just the switch you attach to the steering wheel?
 
Back
Top