bell housing change help!

peter8315 · Mar 19, 2012

just been trying to change bell housing got all bolts out but it only comes off about 12mm then its stuck, do i have to remove the plate behind the clutch thrust bearing about 4/5 bolts, looking at the manual it doesnt say anything about removing this plate, bot cant see any other way

oxides · Mar 19, 2012

Have you taken the nut off the end off the shaft under the main output shaft?

jamesmartin · Mar 20, 2012

peter8315 said:
just been trying to change bell housing got all bolts out but it only comes off about 12mm then its stuck, do i have to remove the plate behind the clutch thrust bearing about 4/5 bolts, looking at the manual it doesnt say anything about removing this plate, bot cant see any other way

front bearing cover needs removing 3 lower bolts( be careful retightening as threads are very fragile) 1/4 bs socket and 4 nuts 5/16 bs undo layshaft nut as said ,it helps if you knock the 3 bots securing bell housing to box cover

peter8315 · Mar 20, 2012

thanks james

peter8315 · Mar 20, 2012

job done with the very helpfull instructions from jamesmartin and oxides, thanks,0 Pete

bell housing change help!

peter8315

Active Member

oxides

Well-Known Member

jamesmartin

Well-Known Member

peter8315

Active Member

peter8315

Active Member

Similar threads