P38A Auto Gearstick, What Now?
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,307
- Location
- Buckinghamshire, UK. ('95 DT)
You could get a manual?
- Posts
- 2,101
- Location
- Mull of Kintyre
He came from Barcelona and knows nothing
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
the inner rod in the stick ,the pawls and cable, working lever whilst applying oil will push it down the cable
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
looks like its full of crumbs and tobacco,filling gearbox up?
- Posts
- 16,478
- Location
- Benfleet, Essex
Getting a vacuum cleaner in there wouldn't hurt really.
If getting oil down between the outer and inner parts of that column is required you might try cutting a cheap plastic funnel at the right point to be a firm fit over the outer;clean it up really well and then wrap self-amalgamating rubber tape round the stick to seal it fully and then just pour the oil into the funnel. Let gravity do its job. If the centre part needs to be pushed down then you can do it with any hammer handle or whatever.
Never had this apart so don't know what you are trying to do really.
Good luck mate.
If getting oil down between the outer and inner parts of that column is required you might try cutting a cheap plastic funnel at the right point to be a firm fit over the outer;clean it up really well and then wrap self-amalgamating rubber tape round the stick to seal it fully and then just pour the oil into the funnel. Let gravity do its job. If the centre part needs to be pushed down then you can do it with any hammer handle or whatever.
Never had this apart so don't know what you are trying to do really.
Good luck mate.
- Posts
- 19,307
- Location
- Buckinghamshire, UK. ('95 DT)
He let Mozz near it? No wonder it is jinxed.
