Are these the right shocks?

I broke a rear shock/damper on my 1994 Defender 90 and was about to replace them anyway and had the parts ready to fit.

I have never done this before and the bottom line is the replacement shock is slightly different as it has a sleeve fitted inside the rubber... see attached.

Is this the right shock absorber... it doesn't seem to want to go on and I dont want to smack it just yet.

I dont have ABS... I am thinking this could be a clue:doh: Thanks for looking

RTC4639 are for a 110, which are different to those on a 90.
You need STC3767.

Treworgey 90 said:

RTC4639 are for a 110, which are different to those on a 90.
You need STC3767.

Click to expand...

Thank you, I am sure you are right.... just checked the Paddock site again and my order. They say that RTC4639 is '90 inch rear shock absorber' ....No trace on STC3767. But they sent STC3766 for the front shocks.
One day I will get an easy job... everything I touch siezes solid, wont fit or has to be drilled or put to the grinder.:doh:

Don't bother with crappocks, use LRSeries.

Treworgey 90 said:

Don't bother with crappocks, use LRSeries.

Click to expand...

I will be havin a word with crappocks in the morning.... thanks for the help on this. I thought I was going off my head. LRSeries shows the right part and that I have a 110 rear damper. Thats my weekend screwed