Series 3 Anyone seen these before?

catman275 · May 29, 2019

Hi. this was taken from the inner top corner of the bulkhead. I have never seen them mentioned on build threads or on Youtube.
I cant find them online to buy, I had to fabricate my own.
What have the bulkead restorers done about them?
cheers peter

Hicap phill · May 29, 2019

https://yrmit.co.uk/product/bulkhead-repair-panels-lr-defender-series-2-3/

tottot · May 29, 2019

That is the inner part that is not usualy gone.

catman275 · May 29, 2019

tottot said:
That is the inner part that is not usualy gone.

That is the offside piece the nearside was completely rotton.
I made a replacement for that side, just wondering if they are made anywhere.

tottot · May 29, 2019

Don't think so, not seen any.

dag019 · May 30, 2019

Its annoying they don't make them, I have the same problem on my 110, the outer is fine but the inner panel has rotted through. I might contact YRM and ask them, they are quite good at making pieces they don't currently have as if there is a demand they can put it into standard production with their other patch panels.

catman275 · May 30, 2019

When making it . It was a case of cutting a rectangle of plate, making two bends then make two cuts, bend again cut a bit out, weld together, and weld a bit in. Drill two holes and cut an opening. Easy...............I don't think. It was a pain to make.

C'mon other restorers,How did you do it?

Series 3 Anyone seen these before?

catman275

Well-Known Member

Hicap phill

Well-Known Member

tottot

Well-Known Member

catman275

Well-Known Member

tottot

Well-Known Member

dag019

Well-Known Member

catman275

Well-Known Member

Similar threads