anti roll bar help

essexpestcontrol · May 29, 2013

have used the search function, plus google and u tube and cannot really find an answer, I have new link arms and the 2 rubbers, so can I jack up one side at a time to change each side link arm, or should I raise up the whole front on axle stands, also looked in the haynes, but cant find if the link arms need to be torqued to a specific nb

matt1295 · May 29, 2013

when i did my mondeo before the Freelander i did 1 at a time i also used a grinder and cut the old ones off and just bolted new ones in 10 mins per side if that and job done

spaniel man · May 29, 2013

You'll need to raise the front to do the arb bushes , the rh s bush easy to get to, lhs bush not as much room to work on, wo rk the bolts 2 per clamp with plenty of releasing fluid can be a pain to get out can easily snap the bolts being well and truly rusted, snapped bolt sub frame off

essexpestcontrol · May 31, 2013

well, I got both the new link arms in, have left the arb bushes for now, the n/s one that I had been advised about was a bugger to remove, had to cut the bottom nut off, the o/s easy peasey

Nodge68 · May 31, 2013

I can't see why the left would be harder to change than right unless it's just more likely to rust?
At least you are sorted

essexpestcontrol · May 31, 2013

Nodge68 said:
I can't see why the left would be harder to change than right unless it's just more likely to rust?
At least you are sorted

maybe I sprayed more WD40 on the other one

anti roll bar help

essexpestcontrol

New Member

matt1295

New Member

spaniel man

Member

essexpestcontrol

New Member

Nodge68

Well-Known Member

essexpestcontrol

New Member

Similar threads