Old man river
Member
- Posts
- 13
- Location
- Cornwal
Just replaced out my front Diff after it went bang. Exchange all went well but now I have the abs and tc lights on. No faults showing on obd reader. No cables disturbed during work. Any ideas welcome.
ABS \ TC light on after front diff change
- Thread starter Old man river
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 6,579
- Location
- uk
From your other posts I see you have a 2.4 Puma. I have wiring diagrams for the 2.2 which has differences to the 2.4, (don't have diags for 2.4). The 2.2 has an earth point for the instrument panel, located as in the attachment. Might be the same location on yours, and might have been disturbed when the transfer box was worked on. Long shot but worth a look? Also there are several earths which are fastened to the drivers side of the transfer box, were these all refitted?
- Posts
- 6,579
- Location
- uk
Oops - missed the attachment off
Old man river
Member
- Posts
- 13
- Location
- Cornwal
The lights come on with the ignition and stay on.
tottot
Well-Known Member
- Posts
- 8,007
- Location
- west wales coast
Have you driven it? Had this issue with my Focus last week after a front drive shaft replacement. When I drove it a short distance light went out.
Last edited:
Similar threads
