justin king
Member
- Posts
- 62
- Location
- West Sussex
had to fit a new abs pump module from ecutesting as mine was shot when i brought the landy. fitted it and all worked for a few weeks. however now the 3 amigos are back. From the nanocom i can run the pump, valves etc etc. When i check for faults i have none even though the lights are on (TC does go off sometimes).
The ABS is working however as i can jump on the brakes and you can feel the resistance in the pedal and it pumping.
ive fitted a new ECU (under seat) earths and power all checked.
the garage next door has now stuck there snap on reader on, checked have no faults also checked wheel speeds etc and all feed back ok.
At a loss now, any help before i get my pants pulled down by landrover... other option i can the bloody wing back off and send the pump back again.
for the idiots which want to reply and say pull the bulb dont waste your time the system is there for a reason.
i know how the abs is supposed to work hence why im at a loss.
So anyone had this issue before???
many thanks
The ABS is working however as i can jump on the brakes and you can feel the resistance in the pedal and it pumping.
ive fitted a new ECU (under seat) earths and power all checked.
the garage next door has now stuck there snap on reader on, checked have no faults also checked wheel speeds etc and all feed back ok.
At a loss now, any help before i get my pants pulled down by landrover... other option i can the bloody wing back off and send the pump back again.
for the idiots which want to reply and say pull the bulb dont waste your time the system is there for a reason.
i know how the abs is supposed to work hence why im at a loss.
So anyone had this issue before???
many thanks
