Abs fault

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Taximan2011

New Member
Posts
338
Location
Weston Super Mare, N.Somerset
ABS Issue update.......ok changed front airstrut yesterday air suspension fault cleared and working now. Although have a separate issue with that......

Back to ABS fault. On dash earlier today when I switched on ....FAULT hdc inactive...

Took it to a local garage who plugged his launch computer in and checked air suspension no faults.

Then checked ABS for faults....the Following FAULT codes came up.....

Temporary system deactivation
ABS Valve Relay
Transfer gearbox CAN error.

Any of you experts have any suggestions on these faults !!!!!
 
The temporary deactivation is just caused by battery disconnection , as I suspect is the Can error message , which just leaves the abs relay to check out
 
I would check your battery charge ( you can do this via the instrument test feature) then change abs relay. The stored faults shouldn't be an issue then
 
It's an easy process detailed on rave , I'm using i phone so can't send you it but you should be able to find it
 
Good Lord Taximan, if I were you I would have taken it back ages ago. I've never heard of SO MANY things wrong at the same time. How much did you pay for this?

Ref ABS fault, the ABS ecu is the first in the sensor queue so when it pings, it sets off a whole lot of other sensors as the signal cant get through to them, even though they have nothing wrong. (put in my simple, non-technical layman's language)

Take the cover off the ABS sensor in the engine bay and check for little bits of corrosion residue on the spikes. I had this and despite LR dealer telling me I needed a new ABS unit at £1000, i simply gave the spikes a brush adn all was well.
 
Back
Top