Vagrent
Yaaaar
- Posts
- 18,109
- Location
- Poiret West Sussex, Chichester.
Hello there.
I am not gonna sell my 90 I am gonna finish it...yay..
Right if I am to succeed I am definitely gonna need the help of an expert, better be one reading this
Basically I would like to know some measurements. Its been 6 months now since I started and I have lost the will to proceed due to the fact Its an outdoor project and since I stopped it has rained pretty much the whole time
Easter weekend better be good or I am libel to to kill
Lol
Right does any one know the actual lenths of the brake lines from the 'block thing'( Combination valve or the P.D.W.A. valve.) just after the master cylinder?....AAH problem already! I dont know what sort of valve it is, not able to look at it till the weekend cant remember how it was all configured...?...:doh:
OK I have the land rover PDF that I downloaded ages ago and after the brake cylinder the front brake line goes into a splitter(?) then goes off to left then right(?)
Rear is just one pipe the goes off to a point above rear axle to flexi then splits to each side(yes)?
I need to know the lenths of those pipes 3 pipes and the name/spec/detail of the screw in ends so I can give it to my local brake hose/line maker (who's workshop is VERY close to my house) and then when I get the time off I can fit them before I replace the bulkhead, seat centre section, roof all that bolliocks so it is in one peice to move it to storage.......
Arse..I know what your gonna say..**** it put it together get the lengths of the pipes, more details of the pipes, then do it after when you got more info...:doh:
I still wanna know though:crazy:
I am not gonna sell my 90 I am gonna finish it...yay..
Right if I am to succeed I am definitely gonna need the help of an expert, better be one reading this
Basically I would like to know some measurements. Its been 6 months now since I started and I have lost the will to proceed due to the fact Its an outdoor project and since I stopped it has rained pretty much the whole time
Easter weekend better be good or I am libel to to kill
Lol
Right does any one know the actual lenths of the brake lines from the 'block thing'( Combination valve or the P.D.W.A. valve.) just after the master cylinder?....AAH problem already! I dont know what sort of valve it is, not able to look at it till the weekend cant remember how it was all configured...?...:doh:
OK I have the land rover PDF that I downloaded ages ago and after the brake cylinder the front brake line goes into a splitter(?) then goes off to left then right(?)
Rear is just one pipe the goes off to a point above rear axle to flexi then splits to each side(yes)?
I need to know the lenths of those pipes 3 pipes and the name/spec/detail of the screw in ends so I can give it to my local brake hose/line maker (who's workshop is VERY close to my house) and then when I get the time off I can fit them before I replace the bulkhead, seat centre section, roof all that bolliocks so it is in one peice to move it to storage.......
Arse..I know what your gonna say..**** it put it together get the lengths of the pipes, more details of the pipes, then do it after when you got more info...:doh:
I still wanna know though:crazy:
