5 Door Body Kit

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
H

hattus

New Member
Posts
14
Hi Everyone,

I have a 5 door TD4 and have just purchased a brand new body kit for it (STC7911).

needless to say it arrived without any instructions, so I am wondering if I need to trim the existing wheel arch mouldings or will the kit fit over them?

Any ideas or suggestions would be gratefully received :)

Cheers,

Mike
 
looks like it glue's over the arch !
Important info .
Test fit all parts befor fixin
Temp should be 16-30 C
The adhesion promoter pen (STC 7838) mustbe used on the arches befor the stickyon stuff and left to cure for 2 mins but part must be fitted befor 10mins
Hope this elp hattus.
Welcome !
 
mondo said:
looks like it glue's over the arch !
Important info .
Test fit all parts befor fixin
Temp should be 16-30 C
The adhesion promoter pen (STC 7838) mustbe used on the arches befor the stickyon stuff and left to cure for 2 mins but part must be fitted befor 10mins
Hope this elp hattus.
Welcome !
Click to expand...

Hi Mondo,

Thanks for the reply, I will get the promoter pen tomorrow from a dealership. I have also noticed that I may need screws on the rear rear arches kit and the front arch sections.

Cheers Chap,

Mike
 
mondo said:
No probs!
hope it goes well mate !

Just glad you dint get the body kit that turns em into a corrugated shed look-a-like
Click to expand...


Is that the one with the horizontal stripes running along the front and rear ends? if so then I am glad too, I really needed something to stop stone chips, parking dents and to generally protect the bodywork (Epson Green is not a colour that likes scratches) and my kit looks as if it will do the job well.

Cheers,

Mike
 
mondo said:
Yup! thats the one :rolleyes:

looks ferkin horrendous !;)
Click to expand...

Agree totally, not my cup of tea neither, wife now says that the existing protection strips look ok with the added kit, not to sure myself :eek:

Thanks for your advice, all taken onboard!
 
mondo said:
just ignore me mate !

yer better off listnin to "the wife" :rolleyes: :D
Click to expand...

God dont say that!! it will give her ideas above her staion :D

She has a point though because the kit doesnt go to the existing protection strips and I am worried in case the new one wont protect that area.

We shall see, and I will post a few pics when the experts have repaired the balls up that I make of fitting it :D
 
You must log in or register to reply here.

Similar threads

N
Freelander 1 Rapid tyre and brake wear
Replies
16
Views
1K
GrumpyGel
GrumpyGel
malcolm_durant
RESOLVED: Early Freelander 1: dash-mounted cupholder - retaining "locknut" part number or equivalent?
Replies
4
Views
942
Nodge68
Nodge68
dag019
Difference between hard top and station wagon roof
Replies
9
Views
1K
julianf
julianf
D
Disco 2 temperamental interior lights.
Replies
6
Views
603
Stanleysteamer
Stanleysteamer
K
How would you go about selling?
Replies
16
Views
3K
Revd
Revd
Back
Top