4.6L Crown Vic PI engine into a jeep

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

themophead

Guest
I have a totalled Crown Victoria Police Interceptor with a good 4.6L
engine and low miles on it. I was wondering has any successfully
swapped this engine into a jeep? If so, what kind of transmission and
transfer case was used? Thanks.

Rob
 
[email protected] (themophead) wrote in message news:<[email protected]>...
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.


It probably has as its first, best purpose a home in a Ford product
or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
displacement? And a torque curve not suited to four wheel drive
service.

If you really want to do an engine swap, I'd look at diesel. The
torque curve is right and the economy is a lot better.
 
Me, I'd love to swap in a Ford 6.8L v10 into a Jeep, just to see if it could
be done...

"Ted Azito" <[email protected]> wrote in message
news:[email protected]...
> [email protected] (themophead) wrote in message

news:<[email protected]>...
> > I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> > engine and low miles on it. I was wondering has any successfully
> > swapped this engine into a jeep? If so, what kind of transmission and
> > transfer case was used? Thanks.

>
> It probably has as its first, best purpose a home in a Ford product
> or maybe a boat. Putting it in a Jeep will gain you, what, 600cc of
> displacement? And a torque curve not suited to four wheel drive
> service.
>
> If you really want to do an engine swap, I'd look at diesel. The
> torque curve is right and the economy is a lot better.



 
Call Novak

[email protected] (themophead) wrote in message news:<[email protected]>...
> I have a totalled Crown Victoria Police Interceptor with a good 4.6L
> engine and low miles on it. I was wondering has any successfully
> swapped this engine into a jeep? If so, what kind of transmission and
> transfer case was used? Thanks.
>
> Rob

 
Back
Top