30mm body lift

Hi Guys , I'm wanting to do a body lift on my Disco 1 as the tyres ( 32x11.5x15's ) are rubbing on the guards after a 2 inch lift and cutting the rear guards . Can i get away with just installing the 30mm spacers or will i have to get the complete kit ?

what guards are they rubbing on? do you mean the wheel arches?

oops sorry , yeah the rear wheel arches and just the bottom of the front wheel arches . I'm thinking that the 30mm will stop all of the rubbing ..... i hope .

you may be better just trimmin yer wheelarches , it can be done quite well and then put wheelarch spat things on .... you could be addin to yer problems liftin it any further cos yer centre off gravity is gonna be up somewhere near yer chin if ya aint careful...

pull the fookers out and brace them

spacers wont solve the problem, and anything over 2" its recomended that you start on cranked arms and extended brake lines.

RAZ8550TDI said:

spacers wont solve the problem, and anything over 2" its recomended that you start on cranked arms and extended brake lines.

Click to expand...

I may have said it wrong . But i want to put 30mm bodylift blocks in not suspension spacers .

If i was to go with the 50mm body lift what does the complete set up cost with all the brake lines , brackets and so on ? Thanks

i think 2" and 40mm spacers is gonne be your max before modifying brakes and arms. no more than 40mm spacers though. am sure someone will clarify this...

RAZ8550TDI said:

i think 2" and 40mm spacers is gonne be your max before modifying brakes and arms. no more than 40mm spacers though. am sure someone will clarify this...

Click to expand...

Thanks Mate

i've got 2 inch lifted springs and long travel shocks and 4 inch longer brake hoses, i WANT a 50mm/2 inch (whatever) bodylift but can't find anyone cheap enough i mean £250 for a kit is way too expensive

why?

because i own it and that is my wish

i put a wizbilt bodykit on my disco... a right pain in the arse to do!
not as as straight forward as it may seem...