300 Tdi loom.

Wivey Landyman · Jan 26, 2006

Hi all.
Have any of you had problems with wiring looms on the Discos? I have a 96 TDI, when I first got it I noticed the o/s front speakers would not work. The guy that sold it said it would just be the audio plug needing to be pushed in.

I pulled it out and all seemed fine. Checked the connections in the door and foot well, all ok but no continuity from stereo plug to foot well plug. However I noticed a **** load of insulation tape around a number of areas on the wiring loom. Have not removed it yet, not sure if I want to know what has been done there. Apart from the speaker all electrics work, so I have taken the attitude if it aint broke dont mess. This being the case it still bugs missing the stereo effect when listening to G&R.
Has anyone had wiring problems that relate? Any fixes?

MUDDEE · Jan 26, 2006

I'd be inclined to have a quick look at the wiring if just to make some sence of whats been messed about with. you can allways run your own wire's from the audio plug to the speaker (for now)

Wivey Landyman · Jan 27, 2006

Thank's for that, do you know if the rear door on the 300 has any adjustment on the hinges? I have noticed that it leaks,(no surpries there)! The rear door does not seem to seal at the top on to the door rubber.

MUDDEE · Jan 27, 2006

The only adjustment you can make is repositioning the hinge bolts, the door may have droped slightly. you can usually tell by eyeing up the door to the surrounding body panels. what sort of condition is the rubber seal in !!

Wivey Landyman · Jan 28, 2006

Seems to be a bit flat. Will look at replacing that next.

300 Tdi loom.

Wivey Landyman

New Member

MUDDEE

New Member

Wivey Landyman

New Member

MUDDEE

New Member

Wivey Landyman

New Member

Similar threads