300 Tdi flywheel housing (bolts)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Langers

Well-Known Member
Posts
3,162
Location
Kent or Shropshire
Hi all

Trying to source the four lower bolts for a manual 300 Tdi flywheel housing.
They are the ones which bolt through the flywheel housing into the engine mounts at the bottom.

On both Microcat and the 1987 onwards parts catalogues, the flywheel housing shown for a 300 Tdi looks like the one on the left in this picture (i.e. 200 Tdi one);

freightrover056.jpg


And as such they don't show the lower housing-to-engine mount bolts.

Anyone shed any light? :D
 
Back
Top