3 lights on after works, freelander 1

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Enomis

New Member
Posts
4
Location
Cagliari
Hello everybody! After a few works in my Freelander 1 year 2000, as a new clutch and shock absorbed, 3 lights are on, Tc, abs, hdc, but all works well, someone have ideas how to reset the system? Thanks for the help! Simone
 
Good news about 3 amigos lights problem!
After check with diagnostic tools, one sensor weel left side was off no signal, I just tried to clean it before changing, it was very dirty but in good condition, and now it works! And after a few miles with my Freelander all lights they went off. Not always the sensor is broken.... I hope my experience can help someone, thank you Landy Zone!
 
IMG_20220531_192318~2.jpg

IMG_20220608_101601_1~2.jpg
 
Back
Top