3.0 V6 essex Engine!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
thehulkowner

thehulkowner

New Member
Posts
259
Location
Worcestershire
Has anybody else got one of these and where have they got there exhausts from if so mines a LWB and im no good at making up exhausts!
pplleeaassee hheellpp
 
bollocks! thurs folk out there that will make a mild steel one fer a lot less. you take the vehicle to them and they make one to fit.
the only one i know of, because its the one i ever needed to use was in glasgow
 
steve parker made the original conversion kit to put those engines in yer motor , and i'm sure they also made an exhaust to fit the same , i could be wrong but its worth a phone call ..
 
i had to make an egghost fer me 111, as it was only the rear bit i needed to do due to fuel tank problems , i went to the garage where me son works and helped meself to some bit of egghost that they had removed and were throwing away.
over here if they have to replace one bit they will replace the whole lot so you end up with a pile of perfectly good egghost pipe destined fer the dump.
with the aid of me grinder avec cutting wheel and me trusty welder i had made me egghost in about half an hour. and it dint look to bed neither.

so if you have a welder a trip to ****-quick might be the order of the day.
 
You must log in or register to reply here.

Similar threads

Kingshill-Rover
Series 3 LWB in Buckinghamshire - Front Springs
Replies
11
Views
1K
Rangieman123
Rangieman123
P
S3 bulkhead pillar foot ?
Replies
6
Views
813
codfather79
codfather79
J
Engine mounts
Replies
4
Views
327
sierrafery
sierrafery
D
Issue with engine choking at 3500rpm
Replies
1
Views
486
Nodge68
Nodge68
N
Disco 4 (LR4) Lr4 Engine fan runs all the time.
Replies
11
Views
1K
Norler
N
Back
Top