2012 defender front diff flange issue

FIN 55 · Oct 11, 2022

Hi everyone I own a 2012 defender with a puma engine
I'm trying to change the front diff flange oil seal but after removing the prop and the 15mm bolt holding the flange I can't pull the flange even when applying pressure with a bar behind (watching YouTube it is removed by hand) do I need to use a puller or is something else wrong?
Any help will be greatly appreciated
Thanks FIN55

tottot · Oct 11, 2022

Probably corrosion between flange and shaft.

FIN 55 · Oct 13, 2022

Hi,
A puller removed the flange with no problems .
Thanks for advice.
FIN55

dag019 · Oct 14, 2022

Not sure if it is the same with the newer ones but on the older axles I would always use a heavy grease (old fashioned axle grease not modern semi liquid bearing grease) on the splines when reassembling to prevent the issue happening again.

tottot · Oct 14, 2022

I do the same as dag019 above.

2012 defender front diff flange issue

FIN 55

New Member

tottot

Well-Known Member

FIN 55

New Member

dag019

Well-Known Member

tottot

Well-Known Member

Similar threads