200tdi Turbo Hose RTC5099

v8250

Well-Known Member

Posts

6,872

Location

Deepest Darkest...

• Jul 1, 2020

• #1

https://www.lrworkshop.com/parts/RTC5099

https://www.lrworkshop.com/diagrams/land-rover-defender-engine/200tdi/turbocharger_53167#26

Dear All, am just buying new pipe/hose sets for the turbo before install. Hose RTC5099 is coming in at £38 each!!

The hose looks like a std reinforced rubber coolant/oil hose. Do you know of any other supplier at a sensible price, or the spec of the hose so can buy a 90deg length and trim to size.

Thank you

 

H

Hicap phill

Well-Known Member

Posts

16,192

Location

Wiltshire

• Jul 1, 2020

• #2

Unsure of the manufacture but I got full set of silicone hoses of race car company. They do all makes/sizes etc for the kit cars we built.(may be on fleabay)
Fitted them to LR 300tdi no problems.
Oh & S1 air filter.

 

v8250

Well-Known Member

Posts

6,872

Location

Deepest Darkest...

• Jul 1, 2020

• #3

Thanks Phil, after a good google this evening I can readily find 6.5mm ID with 150mm tails at under £15 delivered - and rated to 12.5bar working/37bar burst with 3ply 4.5mm walls. It's only a small dia' hose and I'm damned if I'm going to pay £38

To share for all those who may need the replacement hose in the future http://www.siliconehoseuk.com/epage...12101/Products/"90 Elbows - 150mm leg length"

 

v8250

Well-Known Member

Posts

6,872

Location

Deepest Darkest...

• Jul 1, 2020

• #4

Just ordered, £8.98 incl VAT and 48hr delivery. Let's hope it does the job

 

mick 1986

Well-Known Member

Posts

2,537

Location

Lost

• Jul 1, 2020

• #5

v8250 said:

https://www.lrworkshop.com/parts/RTC5099

https://www.lrworkshop.com/diagrams/land-rover-defender-engine/200tdi/turbocharger_53167#26

Dear All, am just buying new pipe/hose sets for the turbo before install. Hose RTC5099 is coming in at £38 each!!

The hose looks like a std reinforced rubber coolant/oil hose. Do you know of any other supplier at a sensible price, or the spec of the hose so can buy a 90deg length and trim to size.

Thank you

Click to expand...

Part #26, on the second image. Is that not just the silicone hose that goes to the wastegate actuator? If so, just use a normal length of 6mm diameter silicone, it doesn’t need the bend.