2005 td5 door latch replacement

Discodevon · Jan 11, 2024

Hi guys having a problem closing my drivers door I think it may be the latch in the door because a week or so ago my door wouldn’t shut it would just bounce back but luckily it shut when it was locked? When I got home from that episode blasted the latch in wd 40 and through the lock and it’s ok now but not great, anything I can check before I replace the latch? When using a screw driver to mimic the door striker it works perfectly fine when the door is locked but it can take from 1 to a few goes before the latch clicks back

tottot · Jan 12, 2024

A new door striker on the tub could help.
If the plastic roller is worn/damaged it can cause issues.
Getting one in the right position is a case of trial an error both up down and spacing shims in/out.

miktdish · Jan 12, 2024

The bit the latch grabs, on the door pillar, can work loose and move slightly which causes this.
The door can also drop slighly as the hinges wear (or if they too become loose).

Check it all lines-up correctly first.

Discodevon · Jan 12, 2024

Thanks guys, I’ve already replaced the hinges and door latch striker, the door closes lovely if I lock it before closing the door?

tottot · Jan 12, 2024

It doe's seem like an issue with the latch, try getting some actual oil into it rater than WD which evaporates away.
If you have to replace get a quality

OEM part .It is a fair bit of work to replace what with removal of the door card ect and you won't want to be doing this again. You guess how I know this.

Discodevon · Jan 12, 2024

Thanks mate, I’ll probably pay my lovely mechanic to do this as I haven’t any means of locking the landy under cover overnight which means I’d be doing that job in a rush and worrying if I can get it done in time before the sun goes down

Discodevon · Jan 14, 2024

tottot said:
It doe's seem like an issue with the latch, try getting some actual oil into it rater than WD which evaporates away.
If you have to replace get a quality OEM part .It is a fair bit of work to replace what with removal of the door card ect and you won't want to be doing this again. You guess how I know this.

Thanks for your suggestion to use proper oil and not wd40, I have just been out with a diesel/oil mixture and spent about 15 mins working the latch in and spraying more in and out now it’s working like a beauty (for now)

Discodevon · Jan 28, 2024

It’s back to its old self again, the diesel and oil trick did work for a while, did it again worked a bit better. Any advantage to taking the door card off and having a look?

tottot · Jan 28, 2024

With the faff of removing door card you are going to replace it.

KISSMYAURA · Jan 28, 2024

latch internals, check the rods are not bent....

PS use ceramic grease for door lock latches and graphine powder for key locks / barrells.

NEVER oil a key lock, unless you want it furred up with dust n sheet withing a month.

2005 td5 door latch replacement

Discodevon

Well-Known Member

tottot

Well-Known Member

miktdish

Guns n Chainsaws

Discodevon

Well-Known Member

tottot

Well-Known Member

Discodevon

Well-Known Member

Discodevon

Well-Known Member

Discodevon

Well-Known Member

tottot

Well-Known Member

KISSMYAURA

Well-Known Member

Similar threads