Hi everyone I and a p38 the battery went flat I charged it up and now the key fob is not working I have tried the eka code with the key in the lock turning it but only the driver door locks and unlocks and then the alarm beeps when opening and closing the door and dash displays engine disabled press remote or enter key code can any one help
1996 p38 help needed
- Thread starter Matty84
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
private_user
Member
- Posts
- 25
- Location
- New Zealand
Welcome (although it seems a bit odd for another recent member to say that)...
A quick question - did you disconnect the battery before charging?
There's a lot of info around from people with similar problems to yours, but it may be as simple as disconnecting the (vehicle) battery for an hour, then reconnecting and trying again. Sometimes the electronics don't deal well with a 'brownout', which is usually caused by a slow decay in battery voltage, rather than a hard on/off.
If that 'quick fix' doesn't work you'd better do some research and if you're still in trouble try posting a question in the appropriate forum, not here in the intro section
A quick question - did you disconnect the battery before charging?
There's a lot of info around from people with similar problems to yours, but it may be as simple as disconnecting the (vehicle) battery for an hour, then reconnecting and trying again. Sometimes the electronics don't deal well with a 'brownout', which is usually caused by a slow decay in battery voltage, rather than a hard on/off.
If that 'quick fix' doesn't work you'd better do some research and if you're still in trouble try posting a question in the appropriate forum, not here in the intro section
