1992 3.9 cruise pipes.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

captainbeaky

Active Member
Posts
292
Hi all,

I need a little help with my cruise pipes.

I neglected to mark them up when I took the engine out, and I'm wondering where they go.

Can anyone go and have a look at theirs for me please?

There are two pipes off the vacuum pump - where do these go?
One goes to the diaphragm actuator on the throttle (Which one?), the other goes where?

Also, how does this connect with the vac pipe that goes into the cabin?
Ditto the Air con Resevoir pipes and distributor vacuum pipe.

Cheers,
Mike.
 
I think there is 3 pipes comming off the dooby ferkin at the front, is that the vac pump?

2 seem to be a smaller size than the other, the bigger one goes back to just behind the acuator where it T's off.
One goes on to the actuator the other carries on to what seems to be the cabin as you say.
I think it must conect to some brake switch or sommat to brake the vaccum??.

Hope this helps.
 
Back
Top