1992 200tdi Discovery- gradually improving my daily driver

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks for reply. Sorted it now- there was an instruction sheet in the box…!
Have used the chunky cable to go straight to the battery and left off the brown positive cable on the alternator. Other 2 cables are warning light and tachometer- both connected fine and all good and working. Voltage at battery now 14.4v when engine running, so that’s sorted.
8FDED39B-6152-4A41-B6FC-D140F83E1C62.jpeg
 
Might not do any harm to connect the old wire as well if it's still there? If nothing else it will mean that it can't move around and short out anywhere as I doubt there will be a fuse anywhere in it. Just a thought.

Rich
 
Not much of an update but played a gig with my folk rock band at Moira Furnace in Leicestershire. Pulled the Disco up to the blast furnace to unload, and accidentally re-created a 1990s Land Rover promo shot (especially if you ignore the gazebo)!
E3AE2BF6-E5C7-4C44-8DD0-A8A66BBC2FEA.jpeg
 
Zombie thread update! I’d been happily using the old thing for the last few months knowing it’d need work before the MOT, which lapsed in April. Got distracted by fixing up my classic Mini which has been off the road for 5 years and needed serious work, this is now finished (as much as they ever are) and ready to be used! Here she is at the Festival of the Unexceptional on Saturday.
A061E6FE-AEA1-4495-8043-DE3FC0387852.jpeg


Anyway, this meant that it was time to look at the Disco; I knew it needed the corners under the rear door welding. Guess what? Turns out the complete boot floor is utterly buggered too… should have guessed really. The corners look like this…
55F4028C-33D2-4C12-9B6C-44CE722983C9.jpeg

With the trim out it looks even worse. When I tried to undo the passenger side rear seatbelt mount the whole square of metal came out in one…
So looks like new boot floor and surrounding panels! Have been reading the many posts on this before attempting it, going to get replacement panels from YRM. Any advice is much appreciated!
5312513D-DED8-49E6-9681-E2FB383208A3.jpeg
B8210660-6361-44C6-B1A2-6C61604A9682.jpeg

1A493DB0-63E5-4618-B734-DF63DB15DFA5.jpeg

13457C3F-1CD0-4B89-9634-CC6ED066633D.jpeg
 
K2tnt said:
Zombie thread update! I’d been happily using the old thing for the last few months knowing it’d need work before the MOT, which lapsed in April. Got distracted by fixing up my classic Mini which has been off the road for 5 years and needed serious work, this is now finished (as much as they ever are) and ready to be used! Here she is at the Festival of the Unexceptional on Saturday.
View attachment 322658

Anyway, this meant that it was time to look at the Disco; I knew it needed the corners under the rear door welding. Guess what? Turns out the complete boot floor is utterly buggered too… should have guessed really. The corners look like this…
View attachment 322662
With the trim out it looks even worse. When I tried to undo the passenger side rear seatbelt mount the whole square of metal came out in one…
So looks like new boot floor and surrounding panels! Have been reading the many posts on this before attempting it, going to get replacement panels from YRM. Any advice is much appreciated!
View attachment 322665View attachment 322666
View attachment 322664
View attachment 322663
Click to expand...
Love the mini
This is my one, not on the road at the moment though
 

Attachments

  • 20230429_143531.jpg
    20230429_143531.jpg
    346 KB · Views: 50
  • 20230429_143537.jpg
    20230429_143537.jpg
    348.1 KB · Views: 51
K2tnt said:
Zombie thread update! I’d been happily using the old thing for the last few months knowing it’d need work before the MOT, which lapsed in April. Got distracted by fixing up my classic Mini which has been off the road for 5 years and needed serious work, this is now finished (as much as they ever are) and ready to be used! Here she is at the Festival of the Unexceptional on Saturday.
View attachment 322658

Anyway, this meant that it was time to look at the Disco; I knew it needed the corners under the rear door welding. Guess what? Turns out the complete boot floor is utterly buggered too… should have guessed really. The corners look like this…
View attachment 322662
With the trim out it looks even worse. When I tried to undo the passenger side rear seatbelt mount the whole square of metal came out in one…
So looks like new boot floor and surrounding panels! Have been reading the many posts on this before attempting it, going to get replacement panels from YRM. Any advice is much appreciated!
View attachment 322665View attachment 322666
View attachment 322664
View attachment 322663
Click to expand...

Plus body mounts and sills, careful to jig and brace while trying to find good metal ... do it once - do it right ..(one side at a time ;)
 
You must log in or register to reply here.

Similar threads

jbenekeorr
My Discovery 1 Progress
2
Replies
34
Views
8K
John Saunders
John Saunders
Saint.V8
Defender 90 1988 Ninety Truck Cab 200Tdi.....
Replies
5
Views
2K
Elltee
E
D
1992 Defender 110 CSW 200Tdi EUR 4.750,00!!
Replies
0
Views
1K
DLK
D
Saint.V8
  • Sticky
200TDi Timing Belt Change and Cylinder head Refurb How To....
Replies
5
Views
14K
IamRobbie
IamRobbie
Saint.V8
200TDi Timing belt change and cylinder head refresh HOW TO...
Replies
6
Views
9K
toms3
T
Back
Top