1986 LR90 Parts Book
- Thread starter nortm005
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Huddy84
Well-Known Member
- Posts
- 746
- Location
- East Anglia
I would use the ‘87 on one, it covers the 2.5 petrol and diesel engines. The parts didn’t change much until nearer tdi production plus the chassis numbers covered in the ‘87 one covers ‘up to’ a chassis and ‘from’ a chassis so implies it covers them all.
bluedog333
Well-Known Member
- Posts
- 5,436
- Location
- Henley on Thames, Oxfordshire
The book will cover you for most things. The front doors were still Series type in ‘86, so the ones in the catalogue will be different. Pretty much the same other than those.
bluedog333
Well-Known Member
- Posts
- 5,436
- Location
- Henley on Thames, Oxfordshire
2.5?
When did they move to 2.5? probably earlier than 87 at a guess.
bluedog333
Well-Known Member
- Posts
- 5,436
- Location
- Henley on Thames, Oxfordshire
84/85 both petrol & diesel. They may have kept producing 2286cc engines after this time as an option (like they did with the 2.5 after the tdi launch), I’m not sure.
This is what the op needs:
https://blackwells.co.uk/bookshop/p...-by-Brooklands-Books-Ltd-author/9781855202887
Alright, it’s for the 110, but we know it’ll be mostly the same.
Rougharse Racing
Well-Known Member
- Posts
- 883
- Location
- The Grim North
bluedog333
Well-Known Member
- Posts
- 5,436
- Location
- Henley on Thames, Oxfordshire
Good resource that, but doesn’t work for an ‘86.
Rougharse Racing
Well-Known Member
- Posts
- 883
- Location
- The Grim North
Works for my 1986 110.
Land Rover went metric in 1985, I think that the on-line parts book is only incompatible with the very early 110's.
bluedog333
Well-Known Member
- Posts
- 5,436
- Location
- Henley on Thames, Oxfordshire
Yeah, basically the same, doors are different, not much else.
The two books I have is RTC9868cc and RTC9868cb, CC is the one I use the most, but, CB was issued in 1986 and CC issued in 1989. My 90 is 85 even though I use CC for it but my guess is you also need the CC revision.
They cover the 2.3, 2.5 diesel and petrol and some Diesel Turbo but dont expect much for the diesel turbo engine, they were revised so much the books probably couldn't keep up!
Dont read into too much about revision dates, very little got revised, just get the latest revised book for your engine type and you should be good with most other things.
Also, some older parts are better replaced with revised parts, seatbelt inertia reels for instance to lose that stupid fixing down in the corner of the seat box.
They cover the 2.3, 2.5 diesel and petrol and some Diesel Turbo but dont expect much for the diesel turbo engine, they were revised so much the books probably couldn't keep up!
Dont read into too much about revision dates, very little got revised, just get the latest revised book for your engine type and you should be good with most other things.
Also, some older parts are better replaced with revised parts, seatbelt inertia reels for instance to lose that stupid fixing down in the corner of the seat box.
Similar threads
