12J timing 2.5na

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Dickeylefrog

Active Member
Posts
113
Location
Mid Wales
Found two marks on the CAV fuel pump spiggot when setting up my timing. One is the usual indentation but next to it is an F. My instinct is to use the indentation but I cant see anything that describes the timing mark in the Haynes and dont have the RAVE for 12P/19P engine so im not sure if it should be the F. See picture. Any help appreciated
20190919_113614.jpg
20190919_113614.jpg
 
I've just replaced the timing-belt on an early '90' with the 2.5d and used the pop-marks:)
bTlvvcV.jpg

before:eek:
wdeSzGQ.jpg

after:cool: (please excuse the badly aimed photo)
also, in the after photo can see the cause of the belt failure - the bolt tat should have secured the 24v alternator had been re-fitted after and needed a spacer (was bought as a 'non-runner' so unknown as to who was responsible for the 24v equipment removal)

Rich.
 
Back
Top