110 SW Rattling windows
- Thread starter ziggyker
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
judders
Member
- Posts
- 68
- Location
- Basingstoke, Hampshire
I bought some foam strip/tape that was sticky on one side. A couple of strategically placed bits did the job and they haven't rattled since.
It was a bit like this: Adhesive foam Strip for glazing 15m long - Miscellaneous - Greenhouses by The Greenhouse People Ltd
It was a bit like this: Adhesive foam Strip for glazing 15m long - Miscellaneous - Greenhouses by The Greenhouse People Ltd
ratty
I'm not special I'm limited edition
- Posts
- 34,277
get a plastic body filler aplicator or similar (about 4"x2") chop it into 2 equal size pieces (2"x1"). fold em in half and then shove em between the 2 windows.
I suffered the same problem...so much so that I ordered replacement felt that the windows slide on.
Had some difficulty fitting new felt without the hassle of taking the glass out.
Beamends sold the seals separately and I think they were 5 or 6 quid a piece.
Solved the problem and still allows the windows to open.....much better than sealant...
Had some difficulty fitting new felt without the hassle of taking the glass out.
Beamends sold the seals separately and I think they were 5 or 6 quid a piece.
Solved the problem and still allows the windows to open.....much better than sealant...
- Posts
- 83,254
- Location
- Embasinga stocæ
yu used to be able to get rotproof plastic "U" channel to replace the old felt based system.
- Posts
- 83,254
- Location
- Embasinga stocæ
Rocky Mountain offer a window track kit for rear side sliding windows that uses the rubber sliders from their well regarded aluminum front door tops. Anyway If you decide to go with the modern tracks instead of using 1940's technology that provides a predictably dismal life expectancy. To obtain the secret Rocky Mountain rear side window channel kit you need to contact them, and ask for Replacement window track kit #RM9517.
The kit contains 6 X 37 inch lengths of rubber moulding enclosed in an aluminium track.
Sufficient to replace top/bottom & uprights on both sides of the rear safari windows.
Other applications:
Rear sliding widows, Five door second row doors, Truck Cab rear sliding window
Price: £70.50 (£60.00 exc VAT) ·
The kit contains 6 X 37 inch lengths of rubber moulding enclosed in an aluminium track.
Sufficient to replace top/bottom & uprights on both sides of the rear safari windows.
Other applications:
Rear sliding widows, Five door second row doors, Truck Cab rear sliding window
Price: £70.50 (£60.00 exc VAT) ·
Last edited:
