stuck

[wiltshire landyman]

so landys been parked up for 2 weeks since the salisbury plain outing

we fitted bow 2 motor tonight and fitted a new rear solenoid for the rear winch

then i went to move the disco and it wont start afeckingain after i fitted a new starter before last trip and it was fine
but i left it in reverse as handbrake is ****ed and now it wont budge i just cannot get it out of gear..

could gearbox,clutch etc be possibly full of mud n water somehow? i was submerged for a while

 

[3.5 efi]

clutch plate stuck to flywheel probably.

 

[mud muppet]

did you have the blankin bolt in gearbox,for when you swimming?

 

[wiltshire landyman]

did you have the blankin bolt in gearbox,for when you swimming?

yep all wading plugs in

 

[mud muppet]

sounds like you need a bit of a pull to free it up.

 

[blue beasty]

Clutch could be gunked up.....I'd give it a little tug with another vehicle with the clutch depressed....Have you taked the wading plug OUT since?

 

[mud muppet]

yours is manual ent it?

 

[blue beasty]

yep all wading plugs in

There's a notch in the flywheel housing by the starter, sat in water it'll fill up

 

[mud muppet]

wondering if you take out bottom wading plug,will water drain out?

 

[wiltshire landyman]

There's a notch in the flywheel housing by the starter, sat in water it'll fill up

bugger

wondering if you take out bottom wading plug,will water drain out?

worth a look it was the usual clay water of the plain and at a guess over 40" deep

 

[mud muppet]

that clay mud sticks to your hands like glue,so bet its done same to the clutch

 

[mud muppet]

if you werent so far away would av come over.your about 3hrs away.is no one near to give you a pull?

 

[3.5 efi]

see if it will start in transfer box neutral.

 

[wiltshire landyman]

see if it will start in transfer box neutral.

starters fooked again.it was new on the day before the plains trip and worked fine

 

[blue beasty]

starters fooked again.it was new on the day before the plains trip and worked fine

Mine was a 3rd full of sediment after the last time Do you want the one you gave me back? It's on the injun I've taken out so not being used

 

[wiltshire landyman]

Mine was a 3rd full of sediment after the last time Do you want the one you gave me back? It's on the injun I've taken out so not being used

will take mine off and have a look first..thanks

 

[easye1]

have you bashed the starter with a starting basher lump a metal yet ?
but done it when someones turning the key to "start"

 

[wiltshire landyman]

Update..
I hate landrovers....

Cant even budge the hi/low gearstick either its stuck solid aswell, tried pushing landy back to see if it releases of the gear but that dont work

Do i risk giving it a tug forward or could that cause more problems?

 

[gazdav]

Update..
I hate landrovers....

Cant even budge the hi/low gearstick either its stuck solid aswell, tried pushing landy back to see if it releases of the gear but that dont work

Do i risk giving it a tug forward or could that cause more problems?

To be honest mate it sounds more like take the box off. Less chance of braking anything.

 

[Paul D]

Maybe drop the props off to push it, that way you won't feck the gearboxes up further! Definitely sounds like a gearbox/clutch problem ...

Have you been in any muddy water lately, you know, like needing winching out of muddy water that was over your huuuge tyres? It does sound like silt and ****e has got in .. though I guess it could also be the diffs ..