What torque wrench to but for a series 3?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

army ambulance

New Member
Posts
44
What torque wrench should i buy for my series 3? like what size or make or strength. Link to websites would be great!

Thanks
 
I have a 1/2 inch snap-on techangle wrench. The good news is that it has degrees built in so you dont need an angle gauge to do stretch bolts. they can also be had for around 150 pounds second hand, which is a bargain as they are around 500 pounds new.
 
scrappyloz said:
Sorry i dont trust or use halfrauds crap at all. and mines digital :)
Click to expand...

Yawn Yawn SnapOn Yawn. Most of us live in the real world and don't need the supposed "quality" of SnapOn and certainly aren't prepared to spend SnapOn money. If you can drop on SnapOn tools second hand at the right price fair enough.

I certainly wouldn't pay £150 for a second hand torque wrench whatever the make in preference to a new one from Halfords for £50, you have no idea how it has been treated or how far it's calibration has drifted. Or do you pay the SnapOn man to send it away for regular calibration? If you don't you should because it will have drifted.

There are plenty of other tools available at cheaper prices that are just as "fit for purpose" as SnapOn especially for the home mechanic.

When I used to work in the motor trade most of the workshop tools were SnapOn, not because they were better than the alternatives but because the SnapOn rep' used to call every week and replace all the things we had broken, admitted their guarantee is very good (or rather used to be, increasingly there are get outs)

For the OP's information Hafords pro range of tools are more than good enough quality for the home mechanic and come with a lifetime warranty (just like SnapOn) and their torque wrenches always get very good reviews in independent tests (check out the autoexpress website).
 
waldershelf said:
Yawn Yawn SnapOn Yawn. Most of us live in the real world and don't need the supposed "quality" of SnapOn and certainly aren't prepared to spend SnapOn money. If you can drop on SnapOn tools second hand at the right price fair enough.

I certainly wouldn't pay £150 for a second hand torque wrench whatever the make in preference to a new one from Halfords for £50, you have no idea how it has been treated or how far it's calibration has drifted. Or do you pay the SnapOn man to send it away for regular calibration? If you don't you should because it will have drifted.

There are plenty of other tools available at cheaper prices that are just as "fit for purpose" as SnapOn especially for the home mechanic.

When I used to work in the motor trade most of the workshop tools were SnapOn, not because they were better than the alternatives but because the SnapOn rep' used to call every week and replace all the things we had broken, admitted their guarantee is very good (or rather used to be, increasingly there are get outs)

For the OP's information Hafords pro range of tools are more than good enough quality for the home mechanic and come with a lifetime warranty (just like SnapOn) and their torque wrenches always get very good reviews in independent tests (check out the autoexpress website).
Click to expand...

Here fooking here. too many tool snobs in this world, for my liking. I've got loads of Haslfrauds pro tools and never had anby problems with any of them. Or found myself thinking "I wish I'd bought Snap on"..
 
jamesmartin said:
depends on how much you use them ,
Click to expand...
Agreed, to a point. I would guess from the OP that he's quite new to the spannering lark and is looking to build a toolkit for a novice mechanic i.e fit for purpose quality at sensible prices.

In my experience it's the convenience of the rep that calls that makes SnapOn so popular with the trade, they certainly aren't the "best" tools out there and they are expensive. Remember it's the customer who is paying for the rep and his nice van, a cost most tool suppliers don't have.
 
waldershelf said:
In my experience it's the convenience of the rep that calls that makes SnapOn so popular with the trade, they certainly aren't the "best" tools out there and they are expensive. Remember it's the customer who is paying for the rep and his nice van, a cost most tool suppliers don't have.
Click to expand...

exactly
for the non garage peep, the rep aint gonna be interested. Certainly not on a Sunday at 2:0 pm.
 
waldershelf said:
But your local Halfords will be open.

I think I should point out that I own very few Halfords tools, the few that I do own have been absolutely fine but then I tend not to mistreat tools (unless I have to ;)).
Click to expand...

I dont think they would be interested in honouring a snap-on warranty - or do yu suggest buying one of each?
 
waldershelf said:
Agreed, to a point. I would guess from the OP that he's quite new to the spannering lark and is looking to build a toolkit for a novice mechanic i.e fit for purpose quality at sensible prices.

In my experience it's the convenience of the rep that calls that makes SnapOn so popular with the trade, they certainly aren't the "best" tools out there and they are expensive. Remember it's the customer who is paying for the rep and his nice van, a cost most tool suppliers don't have.
Click to expand...
certainely for occaisional diy snapon is a bit overkill ,but for somone like me that uses them a lot ,the thin wall and strength of snapon sockets is a necessity ,it is quality thats why its popular its not the only expensive quality tool, but quality is expensive in any trade or make of tool ,you can tell the difference when used regulary and takes the quality of snapon or equal to not split a 3/8 thin wall socket on 1/2 battery gun
 
jamesmartin said:
certainely for occaisional diy snapon is a bit overkill ,but for somone like me that uses them a lot ,the thin wall and strength of snapon sockets is a necessity ,it is quality thats why its popular its not the only expensive quality tool, but quality is expensive in any trade or make of tool ,you can tell the difference when used regulary and takes the quality of snapon or equal to not split a 3/8 thin wall socket on 1/2 battery gun
Click to expand...

I learnt a lesson a long time ago James. I was selling UK manufactured printer cables at £18 a throw. The component costs were over a tenner. I got invited to see a major buyer for a computer company. After going through all my speill, the quality and low lead times etc, he turned to me and said "I accept everything you say, but why should i buy from you when I can get them for 45p from China? If I throw away 35 out of every 40, I am still better off." A sallutory lesson :eek:.
 
because you wouldnt be able to undo half the stuff i have to at the speed i do with cheap **** , even if you bought lots of them ,ie bihex bolt heads are bad enough when new ,and you try and use the bolt extractor sockets on bihex head ,not all rules of thumb cross over
 
You must log in or register to reply here.

Similar threads

H
Swap grill and headlights from 2A to 3
Replies
4
Views
1K
Tony Monsantoe
Tony Monsantoe
MaxxBeard
Series 3 Series 3 2.25 diesel. Losing power
Replies
7
Views
812
MaxxBeard
MaxxBeard
J
Stainless steel exhaust system for swb petrol series 3
Replies
7
Views
1K
Ant107
A
S
Looking for my old Landrover
Replies
6
Views
687
Slhhughes
S
M
Series 3 2.25 Fuel Line Issue
Replies
2
Views
461
Gun7354
Gun7354
Back
Top